Wednesday, September 16, 2015

Mysterious spinning stone in this new automaton by Kazuaki Harada

Elegance and ingenuity meet in this new automaton by Kazuaki Harada. I should also mention that the piece features some lovely dovetail joinery and more than a little mystery!

See more automata by Kazuaki Harada on his web site.



Labels: , , , , , , ,

Wednesday, June 17, 2015

Working with cams and different types of cam followers


My 16 article on automaton-making for Cabaret Mechanical Theatre is now live on their web site. In this installment, I discuss different sorts of cam followers and how they can be used. The cam gets a lot of attention, but is almost without value in the absence of a cam follower. Read on to learn about the basic types, their advantages, and disadvantages.

Here is where you can read my article on Cam Followers for Automata.


Labels: , , , , , , , , , , ,

Monday, June 15, 2015

Medieval Rack Clock designed by Clayton Boyer

Check out this wonderful Medieval Rack Clock designed by Clayton Boyer. The one shown here was beautifully built by Jeff Hecht.

Plans for this clock (and many others) available at www.lisaboyer.com



Labels: , , , , ,

Monday, February 16, 2015

Zoltar Speaks replica fortune teller - How it was made


Roger Hess wrote to say that he has created a long "how it's made" article detailing the build process of the Zoltar Speaks fortune teller we featured on this blog back in 2010. The video shown above is a new compilation of video clips which shows the mechanism in operation.

This article is a fascinating in-depth look at the process. If you have any interest in old coin-operated machines (or are perhaps thinking of making one) this article is full of useful stuff.  It has a little bit of everything: cam timers, casting eyeballs, paint techniques, jewelry-making, and advanced woodworking methods. And, that's just a taste!  The article serves also to demonstrate the amount of skill and dedication required for a project of this magnitude. My hat is off to Roger Hess. Incredible.

Here's a link to the full-length article on The Making of the Zoltar Speaks Fortune Teller Replica.




Labels: , , , , , , , , , , , ,

Tuesday, December 23, 2014

Profile of Will Matthysen hand his handmade wooden clocks

Check out this lovely profile of Will Matthysen who designs and makes clocks made almost entirely out of wood. Will Matthysen is a designer and maker of furniture. He works out of his workshop in Victoria, Australia. He has designed a variety of handcrafted clocks. Most are made largely from wood, but also may also include other materials such as brass, steel, and glass.

Visit his web site to learn more about Will Matthysen.

For more on the making of wooden clocks Wooden Clocks: 31 Favorite Projects & Patterns (Scroll Saw Woodworking & Crafts Book). The ultimate project in the book is Wooden Gear Clock shown on the cover. In addition to the scale plans, photographs and step-by-step instructions there are also cross-sections and exploded diagrams showing how the wooden mechanism is assembled. Plans for this one clock are worth the price of the book. The remainder of the projects are for clocks with wooden cases with battery movements, which may not be as glamorous, but are far easier to make for less ambitious woodworkers or those looking for handmade gift ideas.



Labels: , , , , , ,

Monday, May 19, 2014

Proxxon Scroll Saw for model and toy making

Proxxon Scroll Saw for model and toy making
I already own a decent scroll saw so it would hard to justify this purchase. But...maybe it's not to late for you!

From the product description
This is the ideal machine for that delicate project: model building, toy manufacturing and precision work. It cuts soft wood (e.g. bass wood) up to 1 3/16" (30 mm), hard wood up to approx. 25/64" (10 mm), plastic (including circuit boards) up to approx. 5/32" (4 mm) and non-ferrous metals up to 5/64" (2 mm) with standard scroll saw blades. The machine has a very stable ribbed die-cast aluminum saw frame with 11 13/16" (300 mm) throat. The blade guide is equipped with an integrated blower. The patented head-part is height-adjustable in 3 positions and offers numerous advantages: The lifetime of the saw blade is tripled after shortening it twice (teeth in the middle part of the saw blade are finally used, too). With the head in the lowest position, working with a blade shortened to 2 23/64" is even more precise. The machined worktable of die-cast aluminum has a size of 6 19/64" x 6 19/64" (160 x 160 mm) and is equipped with an adjustable longitudinal stop and graduated miter gauge (0-90°). The ABS plastic body provides a very practical sliding door on the right side of the housing for the removal of saw dust. The saw is powered by a 110 - 120V motor (85 W) for prolonged use, low noise performance and even supported by a quiet and wear-resistant toothed belt drive, running in a ball bearing assembly. The machine offers an electronically controllable stroke rate from approx. 150 - 2,500 strokes/min.

Here's the link to the Proxxon 37088 DS 115/E Scroll Saw



Labels: , , , , , ,

Monday, January 06, 2014

Animated woodworker automaton and article by Charles Mak

Check out this new automaton by Charles Mak, which was featured in the November issue of the British magazine The Woodworker & Woodturner.



Labels: , , , , ,

Tuesday, December 17, 2013

Desperate for gift ideas? Here are 5 more great books for the mechanically-minded!

We are down to the wire in terms of holiday shopping. If you still need ideas for those mechanically-minded folks on your list, here are 5 more books I recommend personally. You have plenty of time to order them from Amazon in time for Christmas. Problem solved.

Eccentric Cubicle (Make: Projects)

Kaden Harris is one of those fascinating people who seems to know how to make just about everything. His skill and eclectic interests come across loud and clear in his book Eccentric Cubicle. Ostensibly, the book is full of projects for you to make for your cubical at work, but the book's title understates how badass some of these projects are. In the book, you will be shown how to build a working miniature guillotine, a small torsion-powered crossbow, a mechanical golf machine, a bass guitar built into a desk, a fog machine, a mechanical percussion machine, and more. The construction of each project is described in great detail; it is probably MAKE's longest book. As if that weren't enough, each chapter has a sub-theme that covers an essential tool, material, or fabrication technique. These alone could form a book that would be worth the price. The book is written in a playful, irreverent style, which makes for good reading. This thing is full of gems, and one of my personal favorites.

Building Wooden Machines: Gears and Gadgets for the Adventurous Woodworker

Among all of the books on how to make wooden mechanisms, two of the best and most advanced are the two by Alan and Gill Bridgewater: Making Wooden Mechanical Models and Making More Wooden Mechanical Models. Originally published in 1995 and 1999, respectively, they have become increasingly hard to find, especially the second book which now fetches high prices in the used book market. So, it was good news to learn that the two books have been combined into Building Wooden Machines. The new combined volume features 28 ingenious woodworking projects with visible wheels, cranks, pistons and other moving parts made of wood. Each project has step-by-step instructions and plan drawings from which to work. It does assume the reader has woodworking skill and tools, so this outstanding book may not be the best choice for beginners.

Making Mechanical Marvels In Wood

This book also features plans for 15 handsome wooden mechanisms such as the cam and follower, the Scotch yoke, the fast-return actuator, and the geneva wheel. Unlike Building Wooden Machines far fewer of projects in this book require access to and experience with a wood lathe. This makes it useful to a greater number of people. If you are a less experienced woodworker, or do not have a lathe, then then you'll want to chose Making Mechanical Marvels In Wood over this title.

Automata and Mechanical Toys

It is certainly no surprise to find Automata and Mechanical Toys on this list. In the past I have said that if you were to have just one book on contemporary automata that this should be the one. Both a how-to book and a showcase of the art form itself, this book attempts to cover it all. If you love automata, want see examples by well known automaton artists, and want to learn more about how to make these wonderful devices yourself, then this book is a must-have. Here is where you can read a more extensive review of Automata and Mechanical Toys.

Making Mad Toys & Mechanical Marvels in Wood

Rodney Frost strikes again with his book titled Making Mad Toys & Mechanical Marvels in Wood. Previously published as Whacky Toys, Whirligigs & Whatchamacallits, this book has long been at the top of my recommendations. This book features fourteen complete projects -- one of the only ones to do so. Each project has a bit of text, a photo, and many nice vector illustrations detailing the project's construction. I wouldn't call them formal 'plans' -- they are too colorful, assorted, and playful for that name. People determined to build an automaton, but short of ideas, are sure to find a project in this book that speaks to them. The projects have a wonderful vintage feel.



Labels: , , , , , , , , , , ,

Thursday, October 24, 2013

Downloadable plans for action toys at PlayfulPlans.com

Image of wooden toy

Woodworker and author Kevin McGuire has a web site featuring downloadable plans for vintage-inspired wooden playthings. The devious little toy shown in the video above is one of my favorites. On his site will also find plans balance toys, rolling toys, gravity toys, games, and more. His plans include step-by-step instructions, illustrations, and photos of the finished project.

Here is the site's intro video:

Here is where you can check out Kevin McGuire's action toy plans at www.playfulplans.com.



Labels: , , , , , , , , , , , , ,

Tuesday, October 01, 2013

10 Handy Tricks for Woodworkers & Automaton-makers

The latest installment of my column on automaton-making is now live on the Cabaret Mechanical Theatre web site. This one focuses on little tricks that help with automaton-making and woodworking in general. You'll find tips on how to make your own transfer paper and wood filler, some unlikely sources for tools and materials, and a handful of other useful gems. The image above shows a jeweler's ring clamp being used to hold a small piece of brass. This makes filing the piece much easier.

Here is where you can read Dug’s Automata Tips, Techniques and Tricks No. 12 featuring 10 Handy Tricks for Woodworkers & Automaton-makers

I hope at least one of the tips proves useful to you!



Labels: , , , , , , , , ,

Tuesday, March 26, 2013

The clatter and whir from the wooden marble machines made by Paul Grundbacher

Image of wooden marble machine

Woodworker Extraordinaire, Matthias Wandel, has a web page on his informative site featuring seven incredible marble machines made by Paul Grundbacher.

According to Grundbacher, a native of Switzerland, he usually skips the other design steps and jumps right into working with wood -- mostly ash, maple, and linden (aka basswood) scraps a from a local factory. Why not? It may not be the most efficient design process, but it's not all about efficiency. Sure, many of his failed experiments may end up going into the fireplace, but he spends his time working in the medium he prefers. I admire that.

Grundbacher makes his own dowels using a technique he learned from his father. That's smart, given how warped and out-of-round some store-bought dowels are.

Here is the page on Matthias Wandel's site about Paul Grundbacher's wooden marble machines.

[ Thanks Walter! ]




Labels: , , , , , , , , , , , , ,

Thursday, January 17, 2013

Wall-mounted wooden marble machine with weight-driven escapement

Image of wooden marble machine

Derek Hugger wrote in to say that he has spent the past few months designing a fully mechanical marble machine. Titled Kinestrata, the assembly is driven by a 2 1/2 pound weight via the classic Graham Escapement -- named for George Graham (1673-1751)an English clockmaker and inventor who is thought to have created it around 1715.

Kinestrata measures 11 x 17 x 5 inches and contains some 386 parts. The balls roll down 4 unique tracks and are lifted back to the top of the machine by 3 geared lifter rings. Hugger says that it took roughly 400 hours to design and build! Plans should be available for it in the next month or two. We'll keep you posted!


Labels: , , , , , , , , , , , ,

Wednesday, January 09, 2013

The Roentgens' Berlin Secretary Cabinet - Even the secret compartments have secret compartments!

Image of Secretary Cabinet

The Metropolitan Museum of Art is featuring the works of Abraham Roentgen (1711–1793) and his son David (1743–1807) in an exhibit titled Extravagant Inventions. The Roentgens were know for their innovative designs, which often incorporated sophisticated and surprising mechanical devices into the lavish furniture styles of the period.

From the exhibit web page:

Some sixty to sixty-five pieces of furniture and clocks—several of which have never before been lent for exhibition—are complemented by paintings and prints that depict these unrivaled masterpieces in contemporary interiors. The most complicated mechanical devices are illustrated through virtual animations. Working drawings, portraits of the cabinetmakers, their family, and important patrons, as well as a series of documents owned by the Metropolitan Museum and originating from the Roentgen estate, underline the long-overlooked significance and legacy of the Roentgens as Europe's principal cabinetmakers of the ancien régime.

If there is any chance you can see this exhibit, you have until January 27, 2013 to make it happen.

What:
Extravagant Inventions - The Princely Furniture of the Roentgens

Where:
The Metropolitan Museum of Art
1000 Fifth Avenue
New York, New York 10028-0198
Phone: 212-535-7710
Web: http://www.metmuseum.org/en/exhibitions/listings/2012/roentgen

When:
October 30, 2012 to January 27, 2013

[ Thanks Kevin and Falk! ]


Labels: , , , , , , , , , , ,

Tuesday, December 18, 2012

Novel method for creating wooden gears uses beads for the gear teeth

Have a look at this novel method of making a wooden gear. The creator used the Gear Template Generator designed by Matthias Wandel to create two gear patterns. After gluing one of the patterns to a circular piece of wood, holes were drilled into the edge at the proper increments. The beads came with a hole through the middle, so all that was done to them was to add a countersink for the screw head. Finally, the beads were screwed to the circle, creating the finished product you see in the image.

Here is where you can see the full project and more details about this woooden gear with beads for teeth.

[ Thanks John! ]


Labels: , , , , , , ,

Friday, June 22, 2012

Plans for cross-country skier automaton available for Kindle

Ken Schweim is the creator of the mechanical contraption called Convolution and the CPR automaton and plans. He's been keeping busy and has produced a new automaton of a figure cross-country skiing. Plans for the project are available for purchase in Amazon Kindle format.

Plans for cross-country skier automaton available for Kindle

From the project description:

This is a wood automaton project. The motion is provided by a hand crank which drives a set of gears. The gears have a 2:1 gear reduction to provide a more realistic speed of action. The gears also have a right angle drive to allow the hand crank to be placed on the side of the project and not block the view of the mechanical section. The gears drive a two journal automotive type of crankshaft.

The action consists of two skis in motion, both arms and both legs. The arms are activated by attaching each ski pole to the side of the skis. The legs are activated by attachment to the skis. The skis are activated by hangers attached at the bottom which are then connected to the crankshaft journals.

Here is a sample page from the book showing an example of the very nicely done plan drawings:

Image of automata plans

If you would like to build this project, complete construction plans are available on Amazon.Com in Kindle book format under the title of Wood Automata Project.


Labels: , , , , , , , , ,

Wednesday, March 21, 2012

Labyrinth: wall-mounted kinetic wooden sculpture by David C. Roy

Here is a new wall-mounted kinetic sculpture by David C. Roy entitled Labyrinth. Roy was inspired by an animation he found showing the optical effect created when layers of parallel lines are rotated in opposite directions. This simple concept, turned out to be a significant mechanical challenge, taking Roy some 5 years to perfect in physical form. The time and effort were worth it. The final sculpture shown in the video produces a beautiful motion and effect, is easy to operate and will run for a full 12 hours. There is a detailed recounting of the creation process on the artist's blog.

You can learn more about the Labyrinth kinetic sculpture on the woodthatworks.com site.


Labels: , , , ,

Friday, March 16, 2012

How to build the box base for a wood automaton

How to build boxes for wood automata

The seventh article in my Automata Tips, Techniques and Tricks series for Cabaret Mechanical Theatre is now live! In this article, I write about how to make sturdy boxes to hold automaton mechanisms. There are dozens of good ways to make a box. I focus on one simple method using corner butt joints reinforced with wooden dowels. This method is easy to make, doesn't require any special cuts, and can be accomplished with a minimum of tools. Best of all, it allows you to assemble and disassemble the piece during the design and refinement phases of construction. This is a huge time saver!

Here is a link to the article on Building the Boxes for Wood Automata. Also be sure to check out the resources section for some recommended books and tools associated with this article.


Labels: , , , , , , , ,

Wednesday, January 04, 2012

Woodworking show episode about making whiriligs

Woodworking show episode about making whiriligs

Head on over to the PBS web site to see a full half-hour episode of The Woodwright's Shop that shows you how to make wind-powered whirligigs!

Here's a link to the Woodwright's Shop episode on whirligig construction.

[ Thanks Charles! ]


Labels: , , , , , ,

Monday, December 05, 2011

Flying, exercising, and dancing Santa automata

Christmas: The Pre-Reindeer EraChristmas: The Pre-Reindeer Era

Over the years, I have made two automata featuring Santa Claus. Why? Well, he's a great royalty-free character and one that seems tolerant to being modified. The first one I made (shown above) is titled Christmas: The Pre-reindeer Era. It depicts Santa in those early years before he could make the down-payment on that expensive sleigh with all those reindeer.

The second one I made was for a holiday issue of a woodworking magazine. Yup, you can get plans to build this Exercising Santa. The automaton depicts Santa building his upper body strength in preparation for the big night. This one is called Training for Christmas:

Exercising Santa automaton by Dug NorthTraining for Christmas

Here's a new addition to the genre, but I didn't design this one. The Dancing Santa was created by Shawn Cipa -- an award-winning Santa Carver. He made this neat Santa automaton for this year's holiday edition of Woodcarving Illustrated magazine.

Here is a link to Woodcarving Illustrated's Santa Automaton page.


Labels: , , , , ,

Thursday, October 06, 2011

X-Acto Deluxe Hobby Tool Set has it all

X-Acto Deluxe Hobby Tool Set

I've seen the smaller X-acto tool sets, but the X-Acto Deluxe Hobby Tool Set is new to me. I want to carry it with me at all times for spur-of-the-moment model-making! I suppose I would need a larger drill bit or two, but check out what this set includes:

   • #1 knife with #11 blade
   • #2 knife with #2 blade
   • #5 knife with #19 blade
   • 8 blades, including #7, #11, #13, #16, #17, #22, #26, and #28
   • Jeweler’s screwdriver
   • Block plane
   • Balsa stripper
   • Spokeshave (so tiny!)
   • Two routers (I would call them 'scorps', I think.)
   • Four gouges
   • Pin vise
   • Sanding block
   • Three drill bits
   • Coping saw and blades

That's a pretty impressive set of model-making tools, all in a nice little wooden chest.

Blick Art Materials sells the X-Acto Deluxe Hobby Tool Set as does Amazon under the name Xacto X5087 Deluxe Hobby Tool Set.


Labels: , , , , ,

  |   Older Posts >