Monday, October 07, 2013

Spring-driven kinetic sculpture that operates for 15 hours on one winding

Here is another graceful and compelling wall-mounted kinetic sculpture by David C. Roy. This one is titled Variation II Wave.

From the artist's web site:

Variation II Wave is the result of applying what I've learned mechanically to the Variation concept. The mechanism is a single spring drive that delivers about 15 hours of run time. Part of the efficiency is due to a better use of bearings and part to how the mechanism itself is balanced.

Here is where you can learn more about Variation II Wave by David C. Roy.



Labels: , , , , , , , , ,

Monday, September 16, 2013

Artist Chris Fitch gives an in-depth explanation of the mechanics of his incredible swimming fish kinetic sculpture

Photo of fish sculpture

Artist Chris Fitch took the time to of put together a video in which he explains the mechanics of his limited edition piece titled, Tantalus Mackerel. I don't need to say much more here, because his explanation is so good.

As for the piece, here is what Chris Fitch as to say about it:

The story of Tantalus has been, since its Greek origins, a consistently applicable metaphor for the human condition. Tantalus angered the gods by trying to feed them the flesh of his own son, passed off as ambrosia. For this, he was chained to the bottom of a lake that reached to his chin. With luscious grapes drooping from vines above his nose, starving Tantalus was unable to enjoy either food or drink, as they were pulled away whenever he reached. I won't go on about how I think this relates to American culture today, which suffers from a kind of self-inflicted hunger from unrealistic expectations. Nor will I attempt to make any connection between the story of Tantalus and our current global problem with mercury levels in deep sea fish, and how we are our own gods and are punished by our own actions when we poison our own food supply. Let me just say, instead, that this piece is about a frustrated fish trying to catch a bug.

It's an incredible piece in every way: the narrative, the artistry, the mechanics. He only made three of these beauties, and (as of this writing) one is still available. For more videos and photos of sculptures by Chris Fitch, visit http://www.chrisfitchsculpture.com.



Labels: , , , , , , , , , , , , , ,

Tuesday, September 10, 2013

Spring-powered stainless steel and bronze toy car with walnut box

Located in Eindhoven, designer Wouter Scheublin created this gorgeous stainless steel and bronze toy car.

We don't know much more about it other than it comes in an equally beautiful walnut box, is powered by a spring, and was made in a limited edition of 20. I don't know if any are available, or how much they cost, but his contact information is located on his web site.

If you like this, you might also be interested in the Kikkerland zeCar, which is readily available.

Unlike Scheublin's car, the zeCar is powered by a stainless steel flywheel which is connected to the wheels via a series of gears. A gentle push spins the flywheel and supplies the zeCar with the energy it needs to move. You can choose to have the traction be the front, or the rear wheels. You can also slide it upside-down on the flywheel and two free spinning wheels. Zecar is not a race car. It has lots of torque, and so can move up gentle inclines, but it moves rather slowly. It sells for a very reasonable $13 USD.

[ Thanks Adam! ]



Labels: , , , , , , , , , ,

Tuesday, August 20, 2013

Graceful ballerina automaton by artist Colin Neu is powered by a Gramophone motor

Image of ballerina automaton

Artist Colin Neu has finished a new piece, this one featuring a ballerina on a rotating platform. As the platform turns the figure raises and lowers her head, arms and one leg, gracefully striking different positions. As with many of his works, this one is powered by an old Gramophone motor. The dancing figure is made of wood, while the mechanism is made of various metals including brass. Another fine piece!

The aritst's contact information can be found at the end of the video.




Labels: , , , , , , , , ,

Wednesday, January 02, 2013

Mechanical universal Turing machine uses ball bearings for memory

This charming contraption is described a "mechanical universal Turing machine". According the all-knowing Wikipedia:

A Turing machine is a hypothetical device that manipulates symbols on a strip of tape according to a table of rules. Despite its simplicity, a Turing machine can be adapted to simulate the logic of any computer algorithm, and is particularly useful in explaining the functions of a CPU inside a computer.

Here is a presentation by the maker, Jim MacArthur, describing the background of the machine. I gather the catch with this machine is that you have to assume that the length of track is infinite.

The machine was made mostly out of scrap metal and wood. The components include magnets, springs, cams and levers. It uses ball bearings as its memory. No electrical components were used, other than one small motor used to drive it.

[ Thanks Christoph! ]


Labels: , , , , , , , , , , , , , , ,

Saturday, October 06, 2012

Intricate spring-loaded mechanical sculptures that DON'T move

Cavity Mechanism #1 w/Glass Dome

Cavity Mechanism #1 w/Glass Dome, 2008, Mixed, 10" x 7" x 7 "

Artist Dan Grayber creates these small, spring loaded, mechanical objects. I would embed a video for you but there is not much point. Read on.

At first sight it is obvious that some serious engineering and fabrication has taken place, but...nothing is happening. Or is it? Indeed, these mechanisms are actively doing something, but in this case a lack of motion is the goal. Using a variety of mechanical devices Grayber's creations will hold themselves up -- even within a smooth sided glass container.

From the artist's statement:

Objects are invented in order to satisfy particular needs, specifically, human needs. With my sculpture I investigate the concept of need when the human is removed from this equation. I do this by replacing the human with the object itself. My sculptures are invented only to sustain themselves, functioning as self-resolving problems. The result is an object that has been invented only to compensate for the complications created by its own existence. The piece alone represents the need and the resolution.

Here are a couple of other examples from the artist's web portfolio:

Cavity Mechanism #5 w/Glass Dome

Cavity Mechanism #5 w/Glass Dome. 2009. Mixed. 6 " x 6 " x 6 "

Cavity Mechanism #2 w/Glass Dome

Cavity Mechanism #2 w/Glass Dome, 2008, Mixed, 6" x 4" x 4"

The fabrication of these objects looks flawless. I love the consistent use of color and material, which helps to bring some very different things into a unified series.

I should point out that not all of Dan Grayber's work involves mechanical object under glass. He has created sculptures that will hold themselves to corners, concrete, drywall, gaps in walls, and between the floor and ceiling of a room.

Check out more of Dan Grayber's mechanical sculptures on his web site.

[ Thanks James! ]


Labels: , , , , , , , , , , , ,

Wednesday, November 16, 2011

Prototype Arm and Hand by Keith Newstead

I don't know what to say other than this mechanical wooden hand is awesome. The articulating hand and arm were made by the super talented automatist Keith Newstead. There is nothing in the video description to suggest what form this will ultimately take. The fact that the video is titled "Prototype" leads me to believe that we are waiting for something very, very good!

See more amazing creations in wood, paper, and metal on Keith Newstead's web site.


Labels: , , , , , , ,

Tuesday, September 27, 2011

Methods to make a worm for an existing spur gear

Methods for making a worm for an existing spur gear

The Koza web site shows several methods for making a worm for an existing plastic gear. The beauty of the worm drive is that it can produce a great reduction in the rotational speed of your system or allow a much higher torque to be transmitted. Here we are discussing the worm component -- the screw-like element of the drive.

Method 1
The first method (top) involves winding what looks like copper wire around a screw to form a helix. The trick is probably finding the right gauge of wire, then the right size screw thread. Still, if you've got a few gauges of wire and a bin full of miscellaneous screws, it doesn't seem like it would be too hard to do. I do wonder about the copper wire keeping its shape over time.

Method 2
More robust solutions are offered in picture form (bottom). For the second solution, a screw is used as the worm, engaging directly with the
teeth of the gear. Here I worry a bit about the screw threads
actually cutting the plastic gear over time.

Method 3
The third and final method is my favorite. A steel spring is used for the worm to drive the gear wheel. Simply take your plastic spur gear to your local hardware store or spring supplier and try a few out until you find one that meshes well. Though the image shows the spring alone driving the worm gear, you might be able to have a dowel or other axle material running through the center of the spring. This would make the spring easier to attach and provide more rigidity. You would just want to be sure the teeth still engage well with the screw and that the axle doesn't interfere.

Method 4
Automata maker Dave Johnson makes good use of a plastic drywall anchor to serve as the worm on his piece entitled Little Man. You can can catch a glimpse of the drywall anchor driving a wooden worm wheel in the video of the piece.

Thanks again to the Koza web site for the first three techniques. Check out their site for several other interesting mechanical solutions.


Labels: , , , , , ,

  |   Older Posts >