Tuesday, August 16, 2016

Wings in Steel and Glass - mechanical sculpture by Shasa Bolton

Check out the latest piece by Shasa Bolton!

See more sculpture by Shasa Bolton on this web site.



Labels: , , , ,

Thursday, January 10, 2013

Magnificent silver swan automaton by John-Joseph Merlin

Silver swan automaton

The Wall Street Journal featured a nice article on the silver swan automaton housed at the Bowes Museum. The swan was created by John-Joseph Merlin (1735 – 1803), a Belgian inventor and horologist. The automaton is indeed a marvel of mechanical design.

From the Wall Street Journal article:

The most complex machinery is in the neck. The movement is driven by four springs, each about one millimeter thick. There are five levers: one operates the lower bill to preen the feathers and "eat" the fish; the second operates the fish (which is concealed in the neck) that the bird appears to catch; the third allows the swan's head to nod; the fourth arches the neck; and the fifth is linked to the middle and allows its graceful movement.

Once a day, the automaton is set in motion. The bird looks left and right, then turns its neck around as if to preen the silver feathers on its back. Spinning glass rods in front of the majestic bird give the impression of a flowing stream in which several small fish seem to swim. The bird spots the fish and plunges down, beak agape, to catch one. Upon rising, a wriggling silver fish is seen within the bird's beak. After a few moments, the bird swallows the metallic fish and the show ends.

Here is the article in the Wall Street Journal about the silver swan automaton: Magic Wrought by a Merlin.

[ Thanks Bob! ]


Labels: , , , , , , , , , , , ,

Saturday, October 06, 2012

Intricate spring-loaded mechanical sculptures that DON'T move

Cavity Mechanism #1 w/Glass Dome

Cavity Mechanism #1 w/Glass Dome, 2008, Mixed, 10" x 7" x 7 "

Artist Dan Grayber creates these small, spring loaded, mechanical objects. I would embed a video for you but there is not much point. Read on.

At first sight it is obvious that some serious engineering and fabrication has taken place, but...nothing is happening. Or is it? Indeed, these mechanisms are actively doing something, but in this case a lack of motion is the goal. Using a variety of mechanical devices Grayber's creations will hold themselves up -- even within a smooth sided glass container.

From the artist's statement:

Objects are invented in order to satisfy particular needs, specifically, human needs. With my sculpture I investigate the concept of need when the human is removed from this equation. I do this by replacing the human with the object itself. My sculptures are invented only to sustain themselves, functioning as self-resolving problems. The result is an object that has been invented only to compensate for the complications created by its own existence. The piece alone represents the need and the resolution.

Here are a couple of other examples from the artist's web portfolio:

Cavity Mechanism #5 w/Glass Dome

Cavity Mechanism #5 w/Glass Dome. 2009. Mixed. 6 " x 6 " x 6 "

Cavity Mechanism #2 w/Glass Dome

Cavity Mechanism #2 w/Glass Dome, 2008, Mixed, 6" x 4" x 4"

The fabrication of these objects looks flawless. I love the consistent use of color and material, which helps to bring some very different things into a unified series.

I should point out that not all of Dan Grayber's work involves mechanical object under glass. He has created sculptures that will hold themselves to corners, concrete, drywall, gaps in walls, and between the floor and ceiling of a room.

Check out more of Dan Grayber's mechanical sculptures on his web site.

[ Thanks James! ]


Labels: , , , , , , , , , , , ,

Tuesday, May 29, 2012

Kinetic sculpture uses water, air bubbles, and a toilet flush mechanism

Take a look at this fantastic sculpture by Andrew Smith titled Exhaler V. The piece features an enclosed water tank inside of which a capsule is slowly lifted by a stream of air bubbles. Upon breaking the surface of the water at the top, a toilet flush mechanism is triggered, causing the capsule to descent again so the process can be repeated. Very inventive!

See more sculptures by Andrew Smith on his web site.


Labels: , , , , , , ,

Monday, April 02, 2012

The smallest swimming goldfish automaton you'll ever see

Laurence and Angela St. Leger are creators of hand-crafted miniature automata. They've worked their magic again here with this tiny goldfish bowl. When turned, a very tiny hand-crank sets this pair of even smaller goldfish swimming in circles within the bowl. Delightful, as always!

Order your own miniature goldfish tank at Cabaret Mechanical Theatre.


Labels: , , , , , , ,

Sunday, November 06, 2011

Glass working model of Stephenson's Rocket

I posted the other day about the wooden kit for Stephenson's steam engine Rocket. As cool as that kit is, and as amazing as the original invention is, here is something perhaps even more amazing. This working model of Stephenson's Rocket was made by master glassblower Michal Zahradník.

No only does the model work when a fuel tablet is lit bellow a small boiler, but everything is made of glass: crankshaft, piston, counterweight, all of it. No gasket materials or sealants were used.

On the difficulties of making working piston in glass:

The piston is the most arduous part to make due to to extreme level of precision needed. Its parts have to be so accurate that no machinery is of use here. The piston and its cylinder must be hand sanded to perfection, and they are very likely to crack in the process! On average, three out of four crack.

For more info on Stephenson's Rocket, I highly recommend the book The Most Powerful Idea in the World: A Story of Steam, Industry, and Invention.

[ Thanks Catherine! ]


Labels: , , , , , ,

Thursday, November 03, 2011

Half Ounce - Kinetic sculpture by Nick Rayburn

Here's a new piece by artist Nick Rayburn title Half Ounce. This hand-cranked kinetic sculpture incorporates a variety of fascinating components including an antique letter balance, wood, brass, feathers, a magnifying glass, and a bird's skull, which weighs...you guessed it...one half ounce. The artist has created something very intriguing -- an artifact of questionable age and mysterious purpose. Fantastic!

Half Ounce - Kinetic sculpture by Nick RayburnHalf Ounce sculpture by Nick Rayburn

Half Ounce by Nick RayburnDetail of Half Ounce by Nick Rayburn

This piece will soon to be available through Etsy and the Goldbug in Pasadena.


Labels: , , , , , , ,

Friday, June 03, 2011

Monster Head Study No. 2 - beady-eyes & fangs

Back in April, I told you a bit about a creative block that I experienced during the winter months and how making little wooden monster heads saved me. My idea was to get into the workshop, use my tools, maintain my tools as needed, and produce something in during each short session. I promised to show you more of these studies. This post is about the second monster head I made.

I would often start with a small hardwood sphere, commonly found at craft stores. These 1 inch unfinished wood balls come in packages of 12 and are a light, clear-grained wood -- probably birch. These seemed like a good place to start since they are already somewhat head-shaped. What I didn't fully realize is how hard these balls are! Power carving with a Dremel tool worked fairly well, though I had to be careful about burning the wood. Working with a carving knife proved to be very difficult -- not only because the wood was far harder that the basswood (lime) I usually carve, but also because they were difficult to hold. The latter problem was solved by drilling a 1/4 inch hole in the ball and inserting a length of dowel. This provided a handle so I could hold the piece while working on it.

Monster Head Study No. 2Dug North's Monster Head Study No. 2

Once I had nearly finished this guy, I thought it had a somewhat bat-like appearance. So, I found some round red glass beads I had, drilled eye sockets, and glued the beads in place. The pupils are actually the holes used to string the beads. I did a little bit of wood-burning to create those angry eyebrows. Like Monster No. 1, this one has that under-bite of which I am so fond. The two small upturned canines are made of tagua nut -- a hard white material often used as a convincing ivory substitute. The ears (horns?) are made from some scraps of Baltic birch plywood I had sitting in the scrap pile.

As with the first, this monster has no name other than "Monster Head Study No. 2". Taking photos of these monsters is not easy! The wood is so light, they tend to wash out under the lens. They probably need some type of finish to tone them down and give them some depth. I may also need to spend some time learning how to photograph such things.

I liked this one when I made it, but having made many more monster heads since that time, this one has slipped down the list. Still, it served a valuable purpose: I was creating, exploring, and -- most importantly -- getting out of that rut. Hopefully, there are a few useful ideas, tools, techniques, and materials mentioned in this post. There are more monsters to come, so stay tuned.


Labels: , , , , , , , ,

Thursday, July 15, 2010

Weight-driven clock with a sand escapement

The clock shown here is a sort of endless hourglass. The large weight-driven clock uses the passing of sand through a circular series of connected hourglasses to regulate the passing of time. A very novel concept and and a fine piece or kinetic sculpture!

While a bit more conventional, here is where you can get various sand timers.

[ Thanks Christoph! ]


Labels: , , , , ,

Friday, December 19, 2008

Steam-powered kinetic sculpture made of glass

Steam-powered kinetic sculpture
Just when I think I've got a handle on the bounds of human ingenuity in the domain of automata, mechanical toys, and mechanical sculpture -- my eyes are opened anew. Consider: a mechanical kinetic sculpture driven by steam...and made of glass!

Shown here is one of several "Glass Engines" built by glass artist Bandhu Scott Dunham. The form of power, the various shapes, the smooth motion, the assorted colors, the levels of translucence, the inherent fragility of the material itself.

I may have used the term "astonishing" on this blog before. I don't think I had a suitable frame of reference for the word until now.

Check out the Salusa Glassworks site for more images and QuickTime movies of Bandhu's Glass Engines and a hand-cranked marble track (and WHAT A MARBLE!)


Labels: , , , ,

  |   Older Posts >