Thursday, July 18, 2013

Clever use of an auger drill bit as a worm screw to drive a wooden gear

A worm drive mechanism can be very helpful for slowing down a gear train. Just two components can change the ratio drastically -- a task that would require a gear train with many more gears. This can also provide a great deal of mechanical advantage.

Here's a clever use of an off-the-shelf auger style drill bit. The bit is a 7/16-Inch solid centre auger bitdesigned to go into a bit brace like this one.

The end portion of the bit was modified using a Sherline micro-lathe and a Dremel tool with an abrasive cut-off wheel. We don't see how the gear itself was created, but it is modified with a Dremel and sanding drum to better mesh with the worm screw.

From the maker's description:

The wood screw, spurs and cutting edge at the end of the bit would need to be removed as well as the first flight of the auger, which had a shorter pitch. I ground away the bulk of the unwanted material on the bench grinder. The first flight was removed so the remainder of the auger would be of consistent pitch. The center shaft and inside areas of the flutes of the wood auger bit are not uniform. I saw making a helical gear as being a bit problematic for this purpose and decided to use a standard spur gear modified to run as a worm wheel. Since this would be used in a low speed low torque application, this simplified version of the worm wheel should be quite adequate. Because of the inconsistent form of the auger bit, a good deal of trial and error fitting was required.

If you feel like learning all there is to know about worm drives, check out The Theory and Practice of Worm Gear Drives (Kogan Page Science Paper Edition). As the title suggests, this book covers both theoretical and practical design aspects of worm drives. The excellent book Making Things Move by Dustyn Roberts covers the topic adequately for the average mortal, as does the affordable Basic Machines and How They Work.

If you'd rather just tinker a bit with a model (and I would, if I were you), check out Tamiya's Worm Gear Box. This worm gear can produce extremely low speeds of rotation. It has two selectable gear ratios of 216.1:1 and 336.1:1!

See more amazing creations by Ron Walters on his YouTube channel.



Labels: , , , , , , , , ,

Tuesday, December 20, 2011

21 rotary tool tips and tricks for makers

21 rotary tool tips and tricks for makers

My latest installment of Dug’s Automata Tips, Techniques and Tricks has been published. While past articles have focused on construction methods such as how to make wooden circles or how to make a wooden head, this one takes a look at the power rotary tool, or "Dremel" as we often call it. I offer a number of tips ranging from safety to how to work with materials such as wood, metal, and glass. I also share tricks on getting the most from common accessories. There is a link to a chart that specifies which rotary tool bits work best at which speeds. There is also a link to an interactive bit-finder which helps you select the best tool for the job. I hope you enjoy the article!

Here is a link to Dug North's article on 21 rotary tool tips and tricks for makers of all sorts. Here is where you can find previous installments of Dug's Automata Tips, Techniques and Tricks.


Labels: , , , , , , , ,

Saturday, November 19, 2011

Monster Head Study No. 4 - The Aquatic Creature

Carved face of a wizened old manDug North's Monster Head Study No. 4

Yet again, it's been a while since I shared with you one of my little monster head studies. For a little background, here is where you can catch up on my posts about Monster Head Study No. 1 and Monster Head Study No. 2. and Monster Head Study No. 3. This one would be No. 4.

As with the other  monster heads thus far, this one started out as a 1 inch diameter hardwood ball. These come in packs of 12 and are free of knots. They are quite hard and difficult carve with a carving knife or gouges. Whereas for Monster Head No. 3, I used Kutzall carving burrs in a Dremel rotary tool, this time I took a different approach altogether. Actually, for this head I didn't really "carve" at all! The entire thing was shaped on a 1 inch belt sander. Mine is a sturdy homemade unit that my friend gave to me. It belonged to his grandfather, who was an engineer turned toy-maker. Not only is it a great tool (the motor is bigger than most), but I enjoy the thought that it has been used to make mechanical wooden things for three generations.

As you can see, the head is basically a sphere with a number of flat planes sanded into it. Even the mouth was shaped on the sander. By using the edge of the sanding belt, I could notch into the wooden ball. It's not the most detailed mouth ever, but it gets the idea across.

I cut a tiny wooden spool in half and those became the ears for the monster. The eyes were drilled into the front of the face. Into the resulting holes, I placed glass beads tinted just a little bit blue-green. I finished off the eyes by pressing small brass grommets into the eye sockets and securing them with a bit of cyanoacrylate glue. I tend to use Krazy Glue Advanced Formula Gel. It dries just a bit slower than regular Krazy Glue and can be spread easily with a toothpick. I drilled two small holes into the roof of the monster's mouth. I cut the heads off of two short brass brads and glued them into the holes to form a pair of crude fangs. I used an awl to press tiny nostrils into the front of the face. Finally, I sanded a curve into a 1 inch wooden disc using a 1/4" drum sander (see right). This formed the crest that I glued to the top of the monster's head.

I made this one very, very quickly. The overall effect suggests that this is some kind of aquatic monster. I never start out with a plan for these little guys, so this was a surprise -- even to me! While I like elements of this one, it's not quite as sinister or dangerous looking as some of the others. It almost looks friendly! GASP!

I hope you liked learning a bit about this little carved monster head. There are many more to come so stay tuned.


Labels: , , , , , , ,

Monday, January 03, 2011

Dremelcpter - DIY wood toy flies over 100 feet

Dremel powered flying wood toy
Here's an impressive flying toy made from wood -- though I hesitate to call it a "toy" because it is launched by a Dremel rotary tool which spins the 5 inch diameter fan at several thousand RPMs! The author says it can go well over 100 feet. There are complete step-by-step instructions and downloadable plan drawings on the instructables web site. You will need a laser cutter, or order some parts cut by one to complete this project.

Here is a link to the instructable for the DREMELCOPTER.


Labels: , , , , , ,

Sunday, June 14, 2009

Dremel 220-01 rotary tool work station & press

Dremel 220-01 rotary tool work station & pressThe Dremel Work Station allows you to use almost any Dremel rotary tool as small table-top drill press.

You can tilt the Dremel Work Station in 15-degree increments from 15 to 90 degrees horizontal. It can also be used as a telescoping FlexShaft tool stand. Finally there is a little tool caddy for holding a few bits, collets, and wrenches. Comes with the accessory nest, mounting wrench, and instructions.

Here is the link to the Dremel 220-01 Rotary Tool Work Station


Labels: , , , ,

Saturday, May 30, 2009

Acra Mill Plus - create your own mini machine shop

Acra Mill Plus - create your a mini machine shopThe Acra Mill was designed to help model makers perform a wide range of tasks from sanding, grinding, and polishing to machining small pieces to with precision tolerances. The Acra Mill holds a Dremel or similar rotary tool. The Acra Mill comes ready to use. There are many configurations and accessories. If you are tight on space and work with small parts, this is an option to consider.

Here is where you can learn more about the nifty Acra Mill Plus (Warning: ALL CAPS AHEAD).


Labels: , , , , ,

Tuesday, January 09, 2007

Mini Router Table Bargain @ Amazon.com

As a follow up to my last post, I found this mini router table accessory for Dremel (or other) rotary tools. With the right 1/8" router bits,this tool turns your Dremel into a miniature shaper table for cutting grooves (dado), mouldings, sanding, and edging on small wood stock.

This is looks to be exactly the same as the one sold under the Dremel and Craftsman name, but for much less.

Check out this great deal on Mini rotary table at amazon.com

Labels: , , , , ,

  |   Older Posts >