Compact brass and wood motorized ball track

Here's a very compact and mesmerizing rolling ball machine that uses a combination of wood, brass, and a small battery-powered motor to great effect. Enjoy!

[ Thanks Bre! ]

---

Gear Materials, Properties, and Manufacture book

OK, I am basing this on the table of contents (see below)...but this has got to be one of the definitive treatments on topic of gears. Any engineers out there to verify my guess?

Chapter 1 - Basic Understanding of Gears
Chapter 2 - Gear Tribology and Lubrication
Chapter 3 - Ferrous and Nonferrous Alloys
Chapter 4 - Plastics
Chapter 5 - Machining, Grinding, and Finishing
Chapter 6 - Casting, Forming, and Forging
Chapter 7 - Powder Metallurgy
Chapter 8 - Through Hardening
Chapter 9 - Carburizing
Chapter 10 - Nitriding
Chapter 11 - Carbonitriding
Chapter 12 - Induction and Flame Hardening
Chapter 13 - Gear Failure Modes and Analysis
Chapter 14 - Fatigue and Life Prediction
Chapter 15 - Mechanical Testing

Here is Amazon's listing for Gear Materials, Properties, and Manufacture

---

Video of vintage automaton cat restoration

Here is bit of video from the folks at Automatomania showing the inner workings of a antique cat automaton made by the famous makers Roullet and Decamps.

From the YouTube description

This is an automaton of a fur covered papier mache cat by Decamps of Paris Circa 1900. The film shows the restoration at the stage where all the parts have been repaired and the cat is tested prior to re-assembly.

Note the tail curl, it is a realistic action achieved with wooden balls wedged along a tapering spring within the tail, the cord pulls on the last ball only to curl it. This is a fragile part of the cat and is always broken in antique examples I have seen.

The restored cat is now for sale and can be seen at the Automatomania shop online shop.

---

The dangers of an automated snuff machine

Check out this wooden mechanical snuff delivery device. It is ingenious in a sinister sort of way. Let this poor fellow's experience be a lesson to us all!

---

Ellen Rixford mechanical puppets & automata

Ellen Rixford Studio has been in business for 35 years and specializes in sculpture, art dolls, mechanical puppets, displays, and miniature sets.

In addition to being sought out by corporate and private collectors, some of their large pieces have been acquired by the Doll and Toy Museum of New York City, and the Ballard Institute of Puppetry Museum at the University of Connecticut.

Visit the Ellen Rixford Studio web site to see all of their wonderful creations.

---

Mxykikker mechanical wind-up crawling critter

A clever new spring-powered stainless-steel beastie that can even climb over small obstacles.

From the Amazon description

Mxykikker is a tongue-twisting, multi-legged, multi-purpose commemorative wind-up celebrating the 15th year of Kikkerland Design's founding. Mxykikker loves to climb over objects and it sometimes enjoys galloping upside down, with its eighteen fidgety feet. At 6.5" long and 3" tall, this is one buggie that is sure to impress. An occasional bit of spray lubricant is recommended to help keep Mxykikker fit and trim. Designed by Chico Bicalho. Assorted colors, randomly selected.

Here's the link to Mxykikker Mechanical Wind-up Critter.

---

Medieval astronomical wooden clock design

Take a look at the beautiful wooden clock video. The wooden mechanism clock was designed by Clayton Boyer and built by Adrian Iredale. Beautiful work. One day, I'm going work up the courage (or set aside a substantial amount of time) to make one of Boyer's amazing clock designs.

---

Musical automaton ring with moving figures

Now here is a unique piece. This antique ring is an automaton with moving figures built into it! Granted, I don't fully understand how you operate the ring, but the mere concept is unspeakably cool.

From the eBay item description:

This is a very fine and unusual 18K gold mechanical ring with a moving woman and men are playing a song by turning a crank. The background is fine glazed. The ring is in a beautiful and working condition from Isaac Daniel Piguet, Genève, circa 1805.

Here is a link to the full listing for the Musical automaton ring with moving figures.

---

Decoding the Heavens: Antikythera mechanism

Decoding the Heavens: A 2,000-Year-Old Computer--and the Century-Long Search to Discover Its Secrets is about the the Antikythera mechanism a mysterious and sophisticated mechanical device recovered in 1901 from an ancient Mediterranean shipwreck. It is now thought to have been built about 150 - 100 BC and represents the first known analog computer designed to calculate astronomical positions. It's an astonishing piece of ancient mechanical technology with a fascinating history.

From the Publishers Weekly

Marchant, editor of New Science, relates the century-long struggle of competing amateurs and scientists to understand the secrets of a 2000-year-old clock-like mechanism found in 1901 by Greek divers off the coast of Antikythera, a small island near Tunisia. With new research and interviews, Marchant goes behind the scenes of the National Museum in Athens, which zealously guarded the treasure while overlooking its importance; examines the significant contributions of a London Science Museum assistant curator who spent more than 30 years building models of the device; and the 2006 discoveries made by a group of modern researchers using state-of-the-art X-ray. Beneath its ancient, calcified surfaces they found "delicate cogwheels of all sizes" with perfectly formed triangular teeth, astronomical inscriptions "crammed onto every surviving surface," and a 223-tooth manually-operated turntable that guides the device. Variously described as a calendar computer, a planetarium and an eclipse predictor,Marchant gives clear explanations of the questions and topics involved, including Greek astronomy and clockwork mechanisms. For all they've learned, however, the Antikythera mechanism still retains secrets that may reveal unknown connections between modern and ancient technology; this globe-trotting, era-spanning mystery should absorb armchair scientists of all kinds.

Here is a link for more information on the book Decoding the Heavens: A 2,000-Year-Old Computer--and the Century-Long Search to Discover Its Secrets

---

Tom Haney's long animated automaton clock

Here is a look at some of the latest work by automaton-artist Tom Haney. According to Haney,this commissioned piece is "a site specific work -- a clock that is 74" long by 12" high. The clock face sits in the center flanked by 4 articulated objects including a flying woman that I am most proud of.

You can see several "in progress" photographs and four videos of the clock in action on his web site.

---

Proxxon's Miniature Bench Drill Press Machine

More Proxxon goodness for you (me) to ponder...

From the Amazon Description

Proxxon Bench Drill Press TBM 115 - This 3 speed drill press excels at drilling micro holes down to 1/64 inch (0.5 millimeters). The unit offers a high quality machined work table of ribbed die cast aluminum, 8-1/2 inch x 4-3/4 inch in side. It provides an adjustable parallel fence with scale. The solid high chrome steel column is 11 inches high and is 4/5 inch in diameter. The powerful motor is built into the super stable die cast head of the machine, runs very quietly and has a long life expectancy. The power transmission by 3 step aluminum pulley and flat belt provides 3 spindle speeds of 1800, 4700, 8500 rpm. This allows triple torque and lower speeds.

Here's the link for more information on the Proxxon 38128 TBM Bench Drill Machine.

---

Singing bird automata makes for high fashion

To celebrate her 20th anniversary in the business, British designer Lulu Guinness decided to make a singing bird automaton -- within a handbag!

She tapped Adam Wright, a film animatronics maker, to help with the mechanics of the piece. He, in turn, looked to Michael and Maria Start of Automatomania -- experts in the repair and restoration of automata -- for their specialized knowledge and skill.

According to Michael Start, "He spent a few days with us learning about singing birds and then sent us the bird body for Maria to feather in scarlet feathers."

When it was completed they went to an unveiling party at London's Victoria & Albert Museum -- a star studded event with the handbag as a center piece. It's official: automata have become high fashion!

Here is a video about the Singing Handbag.

---

The utimate rubber-band firing wooden robot

Osamu Kanda has created many interesting automata, but this creation is something else entirely! He's made a ride-on, wooden robot with remote controlled-arms with working fingers and a chest that opens up to reveal a series of Gatling-style rubber-band guns. You wouldn't want to get into a rubber-band war with this man!

---

The mobiles and automata of Steve DeSpirito

Artist Steve DeSpirito creates hanging mobiles that use a balance between gravity and gentle air currents to add life and motion to his pieces.

From the artist's statement:

I like to think of my mobiles as a reminder that although life is ever-changing, one can always find beauty and joy in it. All one needs to do is stay balanced and bend slightly with the breeze.

Quite so. He has also created a few hand cranked automata like the one shown above entitled "Winged Thingy".

Check out all of the kinetic art by Steve DeSpirito on his new blog.

---

Making Moving Toys: 30 Quick and Easy Projects

I don't have this book myself (yet), but it looks like it could be a lot of fun. Making Moving Toys offers instructions and templates to make 30 different types of moving toys out of common materials. The projects range from spinning tops, wind-powered figures, paper airplanes, a carousel, a climbing monkey, a zoetrope, and many more. See? Fun!

Here's the link to Making Moving Toys: 30 Quick and Easy Projects to Make.

---

New site for the magical automata of Pierre Mayer

My friend, collegue, and hero -- Pierre Mayer -- has a new web site featuring his amazing work! He specializes in contemporary wood automata that perform magical illusions. Be sure to check it out!

See all of Pierre Mayer's magic automata on is new web site.

---

Dremel 220-01 rotary tool work station & press

The Dremel Work Station allows you to use almost any Dremel rotary tool as small table-top drill press.

You can tilt the Dremel Work Station in 15-degree increments from 15 to 90 degrees horizontal. It can also be used as a telescoping FlexShaft tool stand. Finally there is a little tool caddy for holding a few bits, collets, and wrenches. Comes with the accessory nest, mounting wrench, and instructions.

Here is the link to the Dremel 220-01 Rotary Tool Work Station

---

Video of German-made miniature singing bird box

Here is a nice looking miniature singing bird box captured on video. The box measures 4 1/8 inches long by 2 5/8 inches wide by 2 1/2 inches tall.

From the eBay Listing:

The bird comes out and twirls while flapping his wings and opening/ closing his beak. When we got it to work, there was a faint tweeting noise, but I think it needs a little adjusting to work perfectly.

When you take out the drawer, the bottom says Metall [sic], and there is a mark that looks like an EB in an oval. We looked inside the top and the upper right corner says Made in Germany, and there is a little bird on top of some hills with a K on the left and and G on the right. There is also a 5 on the back of the drawer and the back of the inside near the top.

Here is a link to this German-made miniature singing bird box.

---

Osamu Kanda automaton of figures moving frame

Here's a wonderful video of an automaton by Osamu Kanda depicting two figures sliding a frame back and forth. It's a nice example of figures being moved by the part they seem to be moving.

See more work by Osamu Kanda on his web site.

[ Thanks Falk! ]

---

Giant girl puppet on the move again in France

I've posted in the past about the giant marionette of a little girl created by a group called Royal de Luxe. Brought to life with the aid of cranes, block-and-tackle, and a team of puppeters, the girl was on the move again last month in a piece called "La géante du Titanic et le scaphandrier".

Here is a link with photographs and more information (in French) on La géante du Titanic et le scaphandrier.

Shown here is a video segment of one portion of the performance.

[ Thanks Bonne-voglie! ]

---

Proxxon model-maker's power tools store section

I am the proud owner of two Proxxon tools -- the miniature table saw and the miniature mitre saw. As someone who works with small-scale pieces of wood and metal, I am a big fan of this company's products. The Automata / Automaton Store now features an entire section dedicated to Proxxon tools. If you are serious about model-making and are looking for high quality power tools that are the right size for the job, look no further.

Check out the Proxxon Power Tool section of The Automata / Automaton Store.

---

Authoratative web site on singing bird automata

Falk Keuten of the Spiel und Kunst mit Mechanik blog informs me that www.alte-spieluhren.de -- run by from Detlef Knick of Berlin, Germany -- is the most comprehensive site on the web on topic of singing bird automata. The site is in German only, but has many wonderful photos and diagrams. Shown here is a schematic of a singing bird mechanism. If you can read German, I am envious!

Visit the Singvogel-Automaten page for more on singing bird automata.

---

6-foot long remote controlled reproduction Titanic

At six feet long, this must be the mother of all remote control boats. Priced at $2,500, let's just hope it stays afloat better than the original.

From the product description

This is the 6' long, remote controlled reproduction of the RMS Titanic that includes authentic period details for the most discriminating nautical enthusiast. Painstakingly reproduced at 1:150 scale and involving over 400 man-hours in its assembly, the model is constructed from over 300 individually handcrafted pieces, including sculpted cedar strips that overlay the molded fiberglass hull, white maple planks (stained to replicate the color of the originals) for the decking, and mahogany for various superstructures.

Here is the link to Hammacher Schlemmer's Authentic 6 Foot Remote Controlled RMS Titanic.

---

Video of paper prototyping a griffin automaton

Katy Hargrove has created a great video in which she describes the process she is using to prototype an automaton project. Using manila folders, paper clips, scotch tap, and metal paper-fasteners, she has managed to create a very interesting motion for her griffin project. This is a great demonstration of an easy and effective process for working out the proportions and motions for various automata figures.

Check out more of her projects on the Art by Katy Hargrove blog.

---

Antique alarm clock with automatic candle snuffer

Here's a really nifty gadget clock dating between 1840 and 1875.

From the eBay listing item description

The rear left corner of the clock has a candle tube, and the front has a cantilevered arm that is activated by a time setting on the clock. Upon reaching the desired time setting, the arm lowers and the cup on it’s end snuffs out the candle.There is also a wake-up alarm setting. So we here have a clock that tells the owner when to go to sleep, and when to wake up!

Here's the link for more info on this Carriage clock with alarm and automatic candle snuffer

---

The Hand of Man - Giant Robotic Hand

By far the most impressive mechanical sculpture I witnessed at this years Maker Faire 2009, was Christian Ristow's piece called Hand of Man. The giant hand is HUGE and fully functional via a haptic interface. It's hard to describe such a familiar thing when it is seen on such a massive and powerful scale. Check out this video for an idea of what I am talking about.

Learn more about the artist, Christian Ristow, on his web site.

[ Found via a post on the Make Magazine Blog ]

---

23 Piece Hobby & Craft Tool Set for under $15

I'm a little smitten with this hobby knife and tool set offered by Woodcraft.com. It contains all the things you would expect from one of these sets such as assorted knife blades, handles (3 actually), and a saw blade. But it goes beyond the norm with a inclusion of a tiny spoke shave, block plane, balsa strip tool, sanding block, and tweezers. It comes in a plastic case designed to fit each item. For $15 USD, this looks like a nice starter set for model making or working with any type of wood miniatures (model railroad, planes, boats, carving, etc).

Here's a link to this 23 Piece Hobby and Craft Tool Set.

---

Greg Brotherton on kinetic sculpture, Pendulum

For me, one of the highlights of last weekend's Maker Faire 2009 was the exhibit put on by the Applied Kinetic Arts group. I'm not alone in this opinion for they walked away from the event with 8 Editor's Choice Awards. Here Greg Brotherton answers questions about his piece 'Pendulum'.

Learn more about Applied Kinetic Arts on their web site.

---

Proxxon Micro Band Saw with optional wet cutting

From the Amazon.com Product Description

A solid, ribbed die-cast aluminum housing (not a tubular or sheet metal construction) ensures the necessary stability. The machine has double ball bearing aluminum pulleys, a sturdy machined table with a slot for the miter gauge as well as the coolant trough. The worktable tilts up to 45° for accurate miter cuts. The low noise 110-120V motor (high quality, for quiet, prolonged use) operates via toothed belt. Electronically controlled speeds for exceptionally accurate cutting (no subsequent finishing necessary) are available from 395 to 820 ft/min. A practical table at the outside of the machine housing indicates the recommended speed for various types of material. The blade size of 13/64" x 1/64" (5.0 x 0.4 mm) is ideal for fine work, allowing to cut even smallest radii. The machine is equipped with a vacuum-cleaner adapter to help you work in a dust-free environment.

Here's the link to the Proxxon Micro Band Saw

---

Galloping dinosaur vintage mechanical toy plans

The folks over at The Modern Mechanics blog have scanned and typed up the plans for this animated wooden dinosaur pull-toy.

From the original article:

A TOY saurian from the far-away past proves to be a refreshing novelty to the youngsters. The toy is extremely simple to make, as there are only six major parts. In addition to these, four wheels and some wire complete the whole thing.

Here is the article with photographs and drawings of the dinosaur on The Modern Mechanics blog.

[ Thanks deanS! ]

---