Saturday, January 19, 2013

Room for Wonder - A film about the magical collections of Richard Garriott

This short film features the many collections of Richard Garriott de Cayeux -- video game developer, entrepreneur, and space traveler. Garriott built Britannia Manor to serve as his observatory, home, and occasionally, a giant interactive haunted house. An avid collector of amazing and unusual objects, Garriott's home could fairly be classified as a museum. In this film, magician Brad Henderson from Austin, Texas takes you through this extraordinary collection, room by room.

Among the countless wonders and secret passages, you will find a collection of historic space-related artifacts in Garriott's office, complete with one of the original Sputnik satellites. In the dungeon, you can stare in awe at the shrunken heads and vampire hunting kits. In the laboratory, you will find esoteric scientific instruments and orreries, mechanical models of the planets moving around the sun.

I know you guys will be most interested in Garriott's automata collection, featuring antiques as well works by almost all of the modern makers. The automata collection, vast as it is, can only be covered in part, but you do get to see the works of three artists who surely deserve the limelight.

First, you see Paul Spooner's inimitable wit and ingenuity play out in his Sex Change Machine and Poisoned Milk automaton. The mechanism that makes the cat's tongue seem to lap up the spilled milk is a fine example of Spooner's cleverness.

Next, you get a close-up view of the Argentinian artist Pablo Lavezzari's piece Facing a Fake Foe -- a detailed automaton-within-an-automaton depicting a knight fighting a dragon. The dragon, as it turns out, is a fake controlled by a small demon figure. The piece is also notable for its mechanically produced dragon roar sound effect.

Finally, you are shown a few of the macabre and magical automata created by Thomas Kuntz. Kuntz hand sculpts each of the figures and scratch builds the all of the mechanical elements for his pieces, often on vintage watchmaker's lathes. His autoamta seem to be the direct descendants of the most exquisite automata of centuries past. His piece titled L'Oracle du Mort is a modern masterpiece, featuring an oracle who -- with the help of two imps, the Grim Reaper, and a burst of real flame -- will answer your questions.

Amidst so many incredible automata, and artists whom I hold in the highest esteem, I'm dazed and delighted that one of my own pieces made it into the footage. A Dug North original, titled The Birthing Engine is shown and mentioned early on. I couldn't be more pleased.

This film is rare look at one of the finest collections of contemporary automata in existence. I am glad it was made and I am glad to have had the chance to share it with you.


Labels: , , , , , , , , , , , , , , , , , , ,

Wednesday, October 24, 2012

An in depth look at a steam-powered dancing man by toymaker Ron Fuller

I highly recommend spending 10 minutes with automaton and toy making legend Ron Fuller. In this video Fuller explains the design and construction of a dancing figure that is powered by the steam produced from a small boiler heated with an alcohol lamp. Once the boiler reaches temperature, we get to see the figure dance...and boy, does it dance! There may or may not be a fun little surprise toward the end of the video, but I refuse to say.

Fuller also shows some more traditional examples of dancing figures or "limberjacks" as they are sometimes called. He notes that the addition of a side-to-side motion really helps to improve the dancers motion. I think you'll agree. I love how one arm of his dancing figure is particularly animated, while the other moves just a little. This adds a lot of character to the motion.

Here are a few fun facts you might not know about Ron Fuller.

[ Thanks Paul! ]


Labels: , , , , , , , , , , , , ,

Saturday, October 01, 2011

Beautiful external combustion kraftwagen model

Beautiful external combustion kraftwagen model

Hammacher Schlemmer is certainly fond of Stirling engines. Well, who can blame them? The latest addition to their catalog is this Stirling engine powered vehicle. Made of machine-tooled brass, stainless steel, and aluminum, there is no denying that it is a beauty of a working model, if a rather pricey one.

From the product description:

An alcohol burner in the rear heats a cylinder; a quick twist of its brass flywheel sets the engine's displacement and working pistons into motion up to 2,000 rpm. The resulting expansion and contraction of heated and cooled air inside the engine operates a rocker arm, connecting rod, cam, and crankshaft, which spin four flywheels to drive its two 3 1/2" diameter rubber-bound wheels. A third wheel in front can be manually turned 360 degrees, allowing the car to perform autonomous circles while it putters efficiently.

Here is where you can check out this External Combustion Kraftwagen.


Labels: , , , , , ,

Friday, August 26, 2011

The Scribe Clock: amazing water clock by al-Jazari

A short time ago, we posted about the amazing Elephant clock by the ancient inventor and engineer, al-Jazari. This video demonstrates the workings of a simpler, but nevertheless ingenious water clock.

Like most water clocks, also known as a clepsydra, the flow of water measures the passage of time. In this clock, al-Jazari placed a float on the surface of the water. Though buoyant, the float does have weight. As the water level falls, the weight also falls. Ropes (probably fine chains) and pulleys transfer the the linear pull of the weight into the rotary motion of a vertical axle. A scribe figure attached to this rotating axle will then spin slowly, the rod in his hand pointing to the hour of the day.

Several things make this water clock interesting. First, the use of the figure places it in a category with automata. Second, standing at 1.5 meters high the clock is large -- and no doubt heavy -- but still portable. That's most useful. Third, the reservoir that holds the water has been tapered in an effort to keep the flow of water at a constant rate. This would have made the clock more accurate than a straight-sided tank. Finally, this was designed 800 years ago!

You can learn more about water clocks, as well as other ancient forms of time-keeping from this volume of The Time Museum, a book which also covers sand-glasses and fire-clocks.


Labels: , , , , , , , ,

Tuesday, July 05, 2011

Make your own metal geared candle holder

Make your own metal geared candle holder

When artist Benjamin Cowden first began making kinetic sculpture, coming up with gears that fit together was one of his major dilemmas. In response to this challenge, he developed an easy and relatively fast technique for making gears out of metal plate.

He uses this gear-making technique in the design of this elegant aluminum candleholder. The movement contains three of his handmade gears. The pinion on the left raises and lowers the two candle holding arms. Because he used gears of different size for the two arms, the candles move at different rates.

Here is some video of the machine in use:

This project first appeared within the pages of MAKE magazine Volume 21. Complete instructions and plans are now available for free online!

Here's the article on how to build your own metal geared candle holder


Labels: , , , , , , , ,

Thursday, June 30, 2011

Mechanical fire-breathing dragon automaton

Here's a great short film documenting the design and creation of a mechanical dragon. The hand-cranked automaton actually shoots fire!

Made by Rachel Grimmer, this was her first automaton project which she made for her medieval re-enactment group. The project included researching the history of mechanisms and automata, learning how to make an automaton, and then designing and making the dragon. In this short video, she describes the entire process.

When the crank is turned, the dragon flaps its wings, swings its tail, and blows a powder from its mouth. When blown over a nearby flame, the powder creates a dramatic fire effect. The piece incorporates a number of great mechanisms including a crank-shaft, pulleys, a skew cam, a bellows, ratchet, and a snail cam.


Labels: , , ,

Friday, April 08, 2011

Desktop steam boiler made with common materials

Here is a video of a attractive and effective little steam boiler built with a hand drill, a rotary tool, and some easy-to-find materials. A small soup can is used for the boiler itself. Various hardware store fittings complete the assembly.

If you would like to make this project, here is a link to the well-written instructable on how to build a desktop steam boiler.


Labels: , , , , ,

Monday, December 06, 2010

The Banker automaton by Pablo Lavezzari

Another one of my favorite automaton-makers is Pablo Lavezzari. Check out this delightful piece entitled, The Banker. It is a sophisticated animated bank made of wood, copper, and bronze. The automaton also features a working oil lamp and a crazy clock with a mind of its own. A very special key is required to open the drawer below where the coins are saved. The piece measures 24 X 24 X 55 cm.

See more automata by Pablo Lavezzari on his web site.


Labels: , , , , ,

  |   Older Posts >