Sunday, November 16, 2014

Pathfinders Leonardo DaVinci Aerial Screw Wood Kit


Check out this great kit from our friends at Pathfinders! This time they've designed a wooden kit that allows you to make a replica of Leonardo da Vinci design for the world's first helicopter.

From the kit description:
One of Leonardo's most iconic images, the Aerial Screw (also known as the Helicopter) illustrates the ingenuity of da Vinci, and indicates his obsession with flying. While this idea may never have got off the ground, for some basic technical reasons, it gave us an insight into the different ways in which Leonardo considered the challenge of human powered flying, and defines him as an inventor well ahead of his time. While it is often referred to as a helicopter, the premise of the lift to make it rise is more like archimedes screw than the rotors of a helicopter.

The kit comes complete with all pieces pre-cut and ready to assemble. Even the glue included!  Just follow the easy-to-understand instructions, and in a few hours you will have a completed kit. Mind you, it doesn't fly, but it's wonderful fun to turn the crank, watch the pinwheel gears and see the helical screw spin. A great project for young and old.

Here is where you can order the Pathfinders Leonardo DaVinci Aerial Screw Wood Kit


Labels: , , , , , , , , , ,

Thursday, September 04, 2014

Blast from the past: building a wooden catapult kit, part 1

 
 
This is the first in a two part series reviewing the Pathfinders Medieval Catapult Wooden Kit. In this first part, I will tell you about the kit and give you some assembly tips. In part two, I'll tell you how I went about making the catapult look like it truly belongs on an ancient battlefield.

The kit comes with nearly everything you need to assemble the catapult. The only material you need to provide is white Elmer's-type glue. The kit comes with a small swatch of sandpaper and suggests that you have a ruler and scissors available. The kit arrived in a slender cardboard box with instructions and parts separated into two plastic bags. No excessive packaging, no impossible-to-open-plastic-clamshell. I like that.

The kit contains just over a dozen wooden parts, two washers, some string, a small bit of wire, and some soft Play-Doh type clay -- otherwise known as "ammunition".

The wood is a clear-grained pine. Just one of the pieces of my kit had a medium sized knot in it. It had been filled with a little plastic-wood type filler to keep things solid and smooth.

How were the instructions?
The instructions are printed in black and white on 8 pages. There are instructions in English, French, and German which is nice, though they are intermingled in a way that requires a bit of scanning and rescanning. I found the directions to be very good, though there were a few vague spots. I'll address these very minor pitfalls in the next section. The line drawings in the instructions are simple and clear and serve as the primary means of instruction.

What helpful hints do you have?
Overall, the kit itself took me a little over half an hour to make, though they suggest that you set aside 1 to 2 hours. The kit is suggested for ages 9 and up. That sounds about right to me.

Here are a few helpful hints for the assembling the catapult kit:
  1. Read the entire instruction manual all the way through, paying attention to the drawings. This won't take long and this will prevent any possible confusion.
  2. At first, I wasn't sure how to tell the crosspiece that the holds the trigger from the upright braces. It's quite simple really: just read the directions (I hadn't yet). Note that they have thoughtfully placed red marks on the crosspiece and the base with which it mates.
  3. The kit is held together with pegs that are glued in place. There are 18 total. Be sure to sift through the lot to find the two that a just a bit longer than the others. These are used to add tension to the string.
  4. I found that the pegs fit rather tightly. The glue helps to lubricate them a bit. I gently used a nonmarring hammer to tap the pieces together. Alternatively, you could use the included sandpaper to slightly taper the ends of the dowels and ease their entry.
  5. Add a safety/trigger - The trigger arm didn't always want to hold the throwing arm in place when under tension (OK, yeah...so maybe I have it wound too tightly). I rigged up a small diagonal piece of wood that fits in a notch to keep the trigger arm from swinging. By pulling this diagonal piece out, the trigger arm is free to swing and the catapult will fire. (See image below for my safety/trigger addition.)
  6. A small hobby or razor Saw is handy if you want to trim some of the dowels that are left a bit over the surface of a few parts.
  7. Consider staining and/or sealing your model to increase its beauty and lifetime. More on this in part 2 of this series.

So...does it work?
The packaging claims that the catapult can throw a soft clay ball over 15 feet. This is absolutely true. I easily achieved distances over 20 feet and don't think I have put undue strain on the model. Should you choose to add extra horsepower to your model (and this is just my speculation), I believe some added string and a reinforced crossbar would allow you to throw a grape twice as far as advertised.

The Verdict?
This is a well proportioned and historically accurate catapult. More specifically this is a mangonel variety of catapult that uses twisted fibers for its power source. I gather that many had a sling on the end rather than the spoon shape we typically see. (You can learn more about catapults from The Art of the Catapult: Build Greek Ballistae, Roman Onagers, English Trebuchets, and More Ancient Artillery)

Everything that was promised was delivered and the model outperformed the advertising copy. When was the last time you purchased a product that did that?

I give the Pathfinders Medieval Catapult Wooden Kit high marks.

What's next?
In the next installment of this article, I'll show you how to the catapult model look ancient and ready for a siege.


Labels: , , , , , , , ,

Saturday, November 13, 2010

Review: Enter the Flying Dragon Automaton Kit

Enter the Flying Dragon, Wood Automaton Kit
Enter the Flying Dragon, Wooden Automaton Kit by Pathfinders Design and Technology

What is it?
The Enter the Flying Dragon is a wood automaton kit produced by the Pathfinders Design and Technology. The completed automaton depicts a flying dragon measuring about 45 centimeters long.  When a small hand-crank is turned, the dragon’s wings beat, its arms and legs move forward and back, and the head, neck and tail move up and down.

Who is the kit for?
The kit is intended to be assembled by builders age 9 years and older. I’m considerably older than 9 years old and I had a great time building it. I think it is fair to say that this kit is suitable for anyone who enjoys putting stuff together, mechanical things, and/or dragons.

What comes in the kit?
The kit comes in a cardboard box with no excess packaging. The dragon’s parts consist of pre-cut pieces of 1/4 inch thick solid wood and 1/8 inch thick plywood.  Other parts include assorted dowels, plastic tubing, string, and four screw eyes.  The kit also comes with a sturdy piece of sandpaper (needed for certain steps of the assembly) and white glue. Though the container of glue was small, I found that it was more than enough to complete the project. An instruction booklet completes the package.

What is needed to assemble the kit?
The kit lists only three things that you will need:
●    Enter the Flying Dragon Kit
●    Scissors - these should be sturdy metal ones
●    Ruler  - with markings in centimeters and millimeters

What was the experience of building it like?
The kit contained all of the parts is was supposed to come with it. The pieces were cut well and the drill holes accurate. The wooden pieces required no tweaking whatsoever on my part.

The 10 page instruction book has a playful tone, step-by-step written instructions, and very clear line drawings. You are building a piece of kinetic sculpture here. As such, there are 16 steps involved and you really do need to read the instructions -- including the notes adjacent to the drawings. Some of these are quite important.

Some of the steps involve gluing pieces together. Because the glue will need to dry, you should expect to build your dragon automaton in a couple of shifts.

The instructions call for scoring the thin dowels with scissors and then breaking them. I hadn’t tried this technique before and I wasn’t entirely sure it would work. Well, the technique worked just fine! Just be careful with the scissors and bend the dowel toward the notch made by the scissors. Alternatively, look up Pathfinder’s helpful article on how to use wire cutters to cut dowels.

Where there any issues with the kit?
Not really!

I was a little confused in spots because not all of the parts specified in the directions correspond with what I found in the kit. For example, the 4.5 cm follower part listed in step 5 was actually 3.5 cm. This was not a big deal because the diagrams show the parts so clearly. You can also refer to the parts list illustration at the beginning of the booklet to sort out which pieces you need to use.

The color of the wood parts varied a little. I had one darkish set of front and back legs and one lighter set. Some of the plywood has small gaps that have been filled, but they are so small. If you choose to paint your dragon as recommended, both of these things are non-issues.  There is a coloring template at the back of the booklet that you can use to work out the color scheme of your dragon.

Can you offer any tips and tricks?
In addition to the recommended items, I found the following tools and supplies to be useful:             
●    Small tack hammer - for tapping a few of the pieces together
●    Pin vise with small drill bit - for pre-drilling holes for screw eyes
●    Pencil - for marking lengths of dowels that must be cut
●    Fine tipped marker - for marking lengths of plastic tubing
●    Wire cutters - for cutting thin dowels
●    Masking tap - for temporarily holding strings
●    Toothpicks - for spreading glue
●    Paper towel - for cleaning up any excess glue

There are a few spots where you need to glue parts together, but NOT glue them to adjacent parts. With a little care this is pretty easy to avoid. You can also use a bit of wax paper between parts to keep them from being glued together.

It’s worth the effort to sand the ends of the sticks where instructed. This makes it much easier to insert into the plastic tubing. I found a slight twisting motion helped too.

What’s the final verdict?
You can learn a lot about basic machines from this kit. The automaton incorporates a crank shaft, axle, crank-slider, a follower, rigid and flexible linkages, pivots, and hinges. Likewise, a variety of ingenious construction techniques are used that would be valuable additions to any maker’s catalog of useful knowledge.

My finished automaton needed only a tiny a bit of tuning to work smoothly. This was fully anticipated and addressed in the instructions. I merely had to move the two sides of the head a bit closer to each other and the arms a bit farther apart so they did not hit the head when in motion.  Having made, tweaked, and tuned many automata, I can tell you that this flying dragon was well designed.

Highly recommended!
The finished piece is an attractive working wooden automaton. Whether you leave it unpainted or give it your own artistic touch, it is the kind of thing you will want to keep around and enjoy for a long time.

In action, the dragon performs a dynamic compound motion.  An automaton with a comparable amount of motion by an established automaton artist would easily cost hundreds of dollars. At its current price of $20  -- or even two or three times as much -- the Enter the Flying Dragon wooden automaton kit is a tremendous value. I highly recommend it.


The Enter the Dragon Wooden Automaton Kit can be purchased directly from the Pathfinders web site where you can find an awesome assortment of wooden mechanical kits.



Labels: , , , , ,

  |   Older Posts >