Pages

▼

Friday, October 24, 2008

Hand-Crank Marble Climbing machine with Plans!

Hand-Cranked Marble Climber with PDF Plans
It is with great pleasure that I inform you that Steve Good, proprietor of The Scrollsaw Workshop, has created downloadable plans and a three part video series to help you make the hand cranked marble machine shown here. What more could you ask for?

Here is part 1 of the marble climbing machine tutorial:


Here is part 2 of the marble climbing machine tutorial:


Here is part 3 of the marble climbing machine tutorial:
Finally, here's where you an get the free download of the plans for the climbing marble automaton.

Note: The Scrollsaw Workshop is primarily supported by donations. If you enjoy this pattern, please consider giving Steve Good a donation. He has certainly earned it!

[ Thanks to Charles and Travis! ]

at

3 comments:

  1. AnonymousOctober 29, 2008 at 12:38 PM

    Great project Steve, thanks. Another way to make the groove in the ramp would be to drill a hole through the width of the part on it's side then cut off half of the resulting hole...

    Jeff

    ReplyDelete
  2. kingnearJanuary 27, 2013 at 12:31 PM

    Awesome project. I made this with my 8th grade daughter for a school project. Now it's a coffee table conversation piece. I'm planning on making several of these as kits and put them together with children at an orphanage in Haiti.

    ReplyDelete
  3. UnknownOctober 16, 2019 at 9:16 PM

    any exact measurements for this? Doing a school project

    ReplyDelete